Our 3 step guide
1. Select a style
2. Select a series
3. Select a size
Style Chart
| C |
Single Eye Cap |
This style covers the end of the cable
|
| O |
Offset Eye
|
Typically for load support, this grip can be slid to any location on the cable |
| D |
Double Eye
|
Also called a 'twin leg' grip, this can be used for various hauling applications such as where the cable is hauled with one eye and attached to a fixed position with the other
|
S
|
Lace Up
|
This style of grip is supplied flat and is wrapped around the cable and then laced. Typically for applications where a tubular C, O or D grip cannot be slid over the end of the cable. Available in offset eye (S1 - S7) or double eye (SA - SG)
|
| CHD |
Single Eye Cap, Heavy Duty
|
This C series grip offers high breaking strength and more durability |
| OHD |
Offset Eye, Heavy Duty |
This O series grip offers high breaking strength and more durability |
DHD
|
Double Eye, Heavy Duty |
This D series grip offers high breaking strength and more durability |
LD
|
Light Duty
|
Cost effective alternative for low tension and short distance pulls |
OBE
|
Open Both Ends
|
For joining / splicing cables and ropes |
OBESS
|
Open Both Ends
|
316 Stainless Steel version of the OBE series |
HDGW
|
Heavy Duty Graded Weave
|
Our strongest grip. Higher breaking strength and grip specifically for high tension hauling applications involving bare/insulated conductor or rope |
LV
|
Non Conductive grip for Low Voltage Aerial Bundled Conductor
|
See our LV Table for sizes
|
HV
|
Non Conductive grip for High Voltage Aerial Bundled Conductor. |
See our HV Table for sizes
|
DD
|
Double Eye Both Ends
|
A particular whipcheck for securing hoses at both ends, made to order |
| HR | Hose Restraint
| High Pressure Hose Restraint device. This product range is a double eyed cable grip with rubber protection along the "legs" of the grip leading to the eye. This style is available in series 2, 4, 6 and 7 only.
|
Series Chart
1
| 2070 Galvanised wire strand with alloy ferrule
| General hauling applications |
2
| 2070 Galvanised wire strand with alloy ferrule and galvanised thimble
| Fixed position applications |
3
| 2070 Galvanised wire strand with copper ferrule
| Suitable for underground and corrosive mining environments |
4
| 2070 Galvanised wire strand with copper ferrule and galvanised thimble
| Underground and corrosive environments and fixed position applications
|
5
| 316 Stainless steel wire strand with copper ferrule
| Suitable for underground, corrosive mining and rust prone environments
|
6
| 316 Stainless steel wire strand with copper ferrule and 316 stainless steel thimble
| Suitable for underground, corrosive mining and rust prone environments. Suitable for fixed position applications
|
7
| 316 Stainless steel wire strand, ferrule and thimble
| Our most durable grip, suitable for any working environment.
|
*NB: Alloy ferrules create a spark hazard in most underground mines; copper should be used as an alternative.
Size Chart
| 006 | 6-11mm |
| 010 | 10-14mm |
| 014 | 14-19mm |
| 019 | 19-28mm |
| 028 | 28-40mm |
| 040 | 40-55mm |
055
| 55-75mm
|
075
| 75-95mm
|
095
| 95-120mm
|
120
| 120-150mm
|
150
| 150-190mm
|